Description
for 200M and above fiber-optic homes. Independent signal enhancement module Beamforming intelligent signal enhancement technology external 5*6dBi high gain antenna with
signal coverage of 120 square meters through three walls. Can support signal strength adjustment
according to the specific use of environment by selecting the appropriate signal strength.
above. Supports dual band integration priority to connect fast WiFi band; support broadband
- Support 200MB and above fiber access.
- 5*6dBi enhanced antennas covering 120 square meters with three walls.
- 2.4G&5G uses signal enhancement module.
- Beamforming Signal Intelligent Tracking Technology.
- Signal strength adjustment function.
- Flood control network function.
- Support free installation online.
The AC11’s WAN/LAN ports are equipped with Gigabit wired network ports to support 200MB
and above fiber access; two 5G WiFi designs enable 867M WiFi access intelligent
terminals ensuring full utilization of 200M and above.
5*6dBi high-gain omni directional antennas design which can increase the coverage by
30% compared with the common 4*5dBi dual-band routers. It can meet
the coverage of 120 square meters of large units
and can also access the Internet after wearing
three walls.
(Data from Tenda laboratory, actual coverage may changes by different environmental.)
Both 2.4GHz and 5GHz use independent signal enhancement modules. WiFi penetration
is stronger and transmission is furthest. Even in the corner of the home
you can watch movies.
Supports Beamforming signal intelligent tracking technology according to the user’s
location. The WiFi signal is aggregated into a beam directly to
the user’s Internet access device to achieve
accurate wall penetration.
With signal strength adjustment function the user can freely switch the signal
low power/standard/enhancement mode through the APP
to meet the WiFi usage requirements
in different environments.
After the anti mite network function is enabled, the new device is connected to the
router. The app will receive then push a reminder. If it is found to be an illegal device then the illegal device can be blocked out directly on the APP.
AC11 is equipped with the latest account password migration function. Simply connect the
WAN port of the old router to the LAN port of AC11 and automatically copy the
broadband account password when power is on
eliminating the trouble of installing a new settings.
Product Display
Product Specification
Standard&Protocol: |
IEEE802.3, IEEE802.3u |
Interface: |
1 Gigabit WAN ports+ 3 Gigabit LAN ports |
Button: |
Reset / WPS button; Wifi Button |
Power Supply: |
Power Input: 200-240V—50/60Hz Power Output: DC 12V 1A |
Frequency: |
5GHz: Up to 867Mbps 2.4GHz: Up to 300Mbps |
Basic Features:
|
Support signal strength adjustment function Support SSID broadcast and hide Support MU-MIMO Support Beamforming |
Wireless Security:
|
WPA-PSK, WPA2-PSK, WPA/WPA2
Wireless Security: Enable/Disable
WPS Fast Encryption
|
Antenna: |
5*6dBi External Dual Band Antennas |
Working mode: |
Wireless routing model Client+AP mode Wireless Repeater WISP mode |
Dimension : |
220*141.5*49mm |
LED : |
1*WAN、1*LAN、1*Wi-Fi、1*SYS
|
Characteristic function: |
Password migration function WiFi timing switch Intelligent power saving Panel light switch Tenda App local and remote management
|
Package Content: |
1* AC11 Wireless Router
1* Power adapter
1* Installation guide
|
Reviews
There are no reviews yet.